R313LA is a Wireless Infrared Proximity Sensor for Netvox ClassA type devices based on the LoRaWAN open protocol.

This high-gain directional antenna is the latest in the RAKwireless LPWAN accessories portfolio.

Battery Plus is the RAK's latest battery system incorporating a solar charging system and status monitoring.

This high-gain directional antenna is the latest in the RAKwireless LPWAN accessories portfolio.

This is a high quality outdoor antenna designed to be deployed outdoors, for better range. The antenna connector is one with the antenna body, because this design increases the resistance of the antenna to external conditions further. It is IP67 rated, making it weather proof. It is designed to work in the sub-GHz bands like US915, AU915, AS923.

BastWAN is a Feather form factor board with the ultra-low-power, high-performance RAK4260 module at its core. It is powered by the Microchip R34 LoRa® System-in-Package (SiP) incorporating a 48Mhz SAML21 32-bit microcontroller. It also comes with native USB functionality and a LoRa transceiver.

RAK3272S Breakout Board is specifically designed to allow easy access to the pins on the board in order to simplify development and testing.

RAK3272-SiP Breakout Board is an evaluation board for the new RAK3172-SiP System in a Package LPWAN module. It makes it easy to evaluate the power of the RAK3172-SiP module with access to all pin's of the SIP module. All pins are accessible on 6 rows of Pin headers with a standard pitch of 2.54mm.

The RAK11300 WisDuo LPWAN module is a WisDuo module that gives you the power of the dual core Raspberry RP2040 MCU running in 133MHz. And of course, we added the SX1262 LoRa transceiver chip to open the world of LoRa and LoRaWAN connectivity to this module.

The RAK4630 WisDuo stamp module delivers a powerful Nordic nRF52840 MCU with BLE 5.0 paired to the latest LoRa® transceivers from Semtech, the SX126x series.

RAK3172-SiP is a low-power long range transceiver system in a package (SiP) that is based on STM32WLE5CC chip. It provides an easy to use, small size, low-power solution for long range wireless data applications. This module complies with Class A, B & C of LoRaWAN 1.0.3 specifications.

When deploying Gateways for LoRaWAN, it is crucial to know whether they are far enough away from each other and if the area that should be covered by the gateways is in range at any location. It is important to locate the dead spots in your LoRaWAN network coverage.

When deploying Gateways for LoRaWAN, it is crucial to know whether they are far enough away from each other and if the area that should be covered by the gateways is in range at any location. It is important to locate the dead spots in your LoRaWAN network coverage.

Have everything you need for a comprehensive end device in one place. No need to hustle around, the choice is made easy. Connect all the sensors you need to just one device.

RAK7391 WisGate Connect is a Raspberry Pi CM4-based gateway product meant to support different radio and WisBlock modules. It has several interfaces to meet the needs of different developers (HDMI, Ethernet, USB, mPCIe, CSI, DSI, M.2, WisBlock, PoE, Raspberry Pi HAT).

Specially designed for continuous weather monitoring, Milesight IoT Weather Station (WTS Series) is an ultimate all-in-one weather monitoring system with WTS Sensors, WTS Hub, and solar panel for various atmospheric conditions.

Milesight introduces LoRaWAN® EM320-TH Temperature and Humidity Sensor to offer you the best price-performance ratio. Two optional versions can unleash the potential of EM320-TH sensor to the maximum.

Equipped with LED Lights for Room Status Built-in LoRaWAN® Gateway Module Embedded Ambient Light Sensor and Proximity Sensor NFC Enabled IP30 Rate

The ToF (time-of-flight) principle is based on measuring the time it takes for a modulated near-infrared light to travel from a source to an object and back. By calculating phase difference, the sensor forms 3D depth information for accurate and anonymous people counting..

The LPS8v2 is an open-source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi , Ethernet or Cellular Network (via Optional 4G module).